Auto diagnostic tools,Multi-Di@g Access J2534 Pass-Thru OBD2 Device

Multi-Diag Access

Multi-Diag Access Description
This is device 100% percent compatible with Passthru+ XS (also known as Multi-di@g) by Actia.
J2534 Pass-Thru device is 100% compatible with AUTODATA CD we offer here.
Recommended and tested by major OEM's, J2534 Pass-Thru device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications.
All you need to program the ECU's is a PC equipped with a windows operating system, J2534 Pass-Thru device and the ECU flash programming application of the OEM's. All OEMs are now offering service information via the internet. Herewith the OEM's who tested and validated our J2534 Pass-Thru device:

Beside ECU reprogramming, with the help of Multi-di@g Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions!

Multi-Diag Access Features
-Fully compliant to SAE J2534 & J2534-1
-Either RS 232 or USB interfaces to PC
-K-Line ISO 9141 (100 mA)
-KWP 2000 ISO 14230-4
-SAE J1850 PWM
-SAE J1850 VPW
-CAN 2.0B ISO 11898
-CAN ISO 15765-4
-SCI SAE J2610
-Programmable power supply
-On-board memory

Multi-Diag Access Functions
After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):
Maintenance
-Diagnosis codes from all computers
-Reset maintenance interval
-Modification of the sewage
-Read / erase fault calculators
-Maintenance of the particulate filter
Air Conditioning
-Diagnosis of cooling electronic
-Reading settings cooling circuit
-Test servo actuators
Pollution control
-Diagnosis of the particulate filter
-Electronic control of pollutant emissions
-Control of the Lambda probe
Liaison to the ground
-Electronic configuration of the size of tires
-Electronic configuration of tires (winter / summer)
-Setting valves tire pressure
-Diagnosis and management of shock-driven
-Calibration of the sensor angle Driving (initialization of the steering angle)
Body
-Implementation of safety airbags (lock / unlock)
-Reconfiguration of a new calculator Airbag,
-Diagnosis of calculators Airbag,
-Rain sensor windshield (reading and erasing fault)
-Test panel and activators of lights,
-Setting Xenon headlights,
-Rear radar
Post-Equipment
-Setting up the radio,
-Configuration loader CD,
-Setting alarms
-Configuration of the coupler,
-Configuration bicycle loading system,
Braking
-Diagnosis of calculators ABS, ESP,
-Diagnosis and unlock electric brakes,
-Flush the brake system,
Motor
-Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc...)
-Programming of injectors,
-Electronic configuration of the EGR valve
Expert Mode
-Diagnosis of advanced computers
-Configuration of comfort functions,
-Change the language of the instrument panel,
-physical measures (option with a probe - not supplied)
-Direct access to all functions of diagnosis.

Set includes
VCI (Vehicle Communication Interface)
dB25 to OBD-2 Male cable
OBD2 Male to OBD2 Female cable
DIN6 to USB cable
DIN6 to dB9F cable
Carrying case

Software supports the following languages
Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian, Russian, Serbian, Slovenian, Spanish, Swedish, Turkish.